​START BY CHOOSING THE BEST FENCE MODEL FOR YOUR HORSES

.​SILBER fence is built from horizontal and vertical aluminium pipes. The insulators separate the current from conducting to the ground. The unique design of the pipe structure together with our modern metal-engineering procedures have enabled electricity to run throughout the paddocks horizontal rails. The SILBER fence can also be build up to slopes because the angle of the horizontal pipes in relation to the posts can be changed if necessary. The hight of the horizontal pipes can be adjusted and pipes can also be added later, for example, with foaling or getting small ponies to the stable. Enlarging of the fencing and installing more paddocks is also easy if the amount of horses grows.

You can choose a SILBER fence with one, two, three or more horizontal pipes. Standard lengths for vertical posts are 2 and 2.3 meters. When the length of the vertical post is 2 meters, the installed height of the fence is about 1.55 m. When the length of the post is 2.3 meters, the height of the finished fence when installed is about 1.70 m, depending on the installation height of the posts and horizontal pipes.

SILBER fence can be easily installed without special tools and it transforms smartly according to your needs!

SILBER gates have also electricity

SILBER gates are light and easy to use. They are designed for the daily use with horses and cattle and to enable cleaning and maintenance work at the paddocks and pastures. Electric current runs through the aluminum parts of  the gate, and the latch of the gate acts as a switch off. The power is disconnected from the gate by lifting the latch and closing the latch brings the current back. Disconnecting the electricity from the gate does not cut off the current from other parts of the fence. The electricity prevents the animals from leaning on the gate and testing its durability. The SILBER gate is also safe when transporting animals. The lightness of the gate can be adjusted so that the wind does not swing the gate closed when the horse is transported from the gate. 
​
​You can instal several gates to the SILBER fencing if needed. You can choose a gate with two, three or more horizontal pipes. The standard widths of the gates are 2, 3 and 4 meters. A two-meter-wide gate is suitable, for example, small loaders, and a three-meter-wide gate can also be used by a tractor. The four-meter gate is designed for letting cattle out or driving large tractors.​

TECHNICAL DETAILS

- The horizontal and vertical pipes are all aluminium
- The bolts and the hinges are made from stainless steel
- The diameter of vertical pipes is 80 mm
- The space between the posts is approximately 4 meters and it can be adjusted 
- The diameter of the rail pipes is 40 mm
- The current runs in the rail pipes (horizontal pipes)
- The fence is self-supporting, it doesn’t need assisting pillars

CUSTOM MADE MODELS
Besides our standard models we design and manufacture custom made paddock fences. Parts that differ from regular production require more time and special planning and the reliable functionality of the fencing must be evaluated case by case. Tell us your idea, and let’s plan together whether it would be possible to carry out with reasonable price.

When you have elected the most suitable paddock fence for you, go to Paddock Gate page to select the best gate alternative for your purposes.